Products

R60T

R00S Booster and Systems

2 to 1 Boost Ratio, 0-50 scfm flowrate

Our most popular line of air-driven, air pressure booster systems require no cooling water, lubrication or electricity. These boosters can deliver flowrates from zero to the values shown in the table below, and pressure boost ratios from zero to 2:1. The integral pressure regulator is used to set the maximum discharge pressure desired. The booster will maintain this pressure regardless of fluctuations in supply pressure. When there is no demand for high pressure air, the booster stalls and consumes no energy. It restarts automatically when there is demand.

»Frequently Asked Questions - FAQs
»Shipping Information
»Air Booster Repair Kits

  Flowrate in SCFM
Supply Pressure (psi) Air Discharge Pressure (psi)
50 70 90 110 130 150 170 190 210 230
40 34 14                
60   50 36 16.5            
80       50.5 37.5 18.5        
100           51.5 37.5 15    
120               49.5 35 15
2:1 Air Booster

Model R00S • $1450

  • 2:1 Air Booster
  • 230 psi Maximum Pressure

3D Model is available - contact us

» Brochure
» Instructions

(Replaces the AC001 and CM001 Models)

 
2:1 Air Booster Systems

3.5 Gallon Tank

Model R03S • $2200

  • 2:1 Air Booster System
  • 230 psi Maximum Pressure
  • 3.5 Gallon Receiver Tank

3D Model is available - contact us

» Brochure
» Instructions
(Replaces the AA001 and CN001 Models)

 

12 Gallon Tank

Model R12S • $2450

  • 2:1 Air Booster System
  • 230 psi Maximum Pressure
  • 12 Gallon Receiver Tank

3D Model is available - contact us

» Brochure
» Instructions
(Replaces the CA001 and CP001 Models)

 

60 Gallon Tank

Model R60S • $3800

  • 2:1 Air Booster System
  • 190 psi Maximum Pressure
  • 60 Gallon Vertical Receiver Tank

3D Model is available - contact us

» Brochure
» Instructions
(Replaces the CW001 and CY001 Models)

 
System Options

Special Relief Valve: Option GC001 • $40
Replace standard 235 psi relief valve with a lower pressure valve.

Tank With Casters: Option C • $350
Adds 3• swivel casters (two are locking) to a tank allowing the system to be mobile.
Only available on 3.5 Gallon and 12 Gallon receiver tanks
Option C PDF

Secondary Regulator: Option D • $300
Adds a secondary regulator to eliminate pulsations and maximize stored volume.
Option D PDF

Electronic Drain Valve: Option E • $300
Adds an electronic drain valve to automatically drain the tank in regular intervals.
Option E PDF

Safety Vent Valve: Option W • $350
Automatically vents air from booster and tank when supply air pressure is removed.
Option W PDF

View more products:
Air Pressure Boosters SystemsGas Pressure Boosters SystemsPressure Boosters for Nitrogen GeneratorsRepair Parts & KitsHigh Pressure TanksCustom Design & Services