» Products » Air Pressure Boosters » 2 to 1 Boost Ratio, 0-5 scfm flowrate
2 to 1 Boost Ratio, 0-5 scfm flowrate
Our line of compact, air-driven, air pressure booster systems require no cooling water, lubrication or electricity. These boosters can deliver flowrates from zero to the values shown in the table at the right, and pressure boost ratios from zero to 2:1. The integral pressure regulator is used to set the maximum discharge pressure desired. The booster will maintain this pressure regardless of fluctuations in supply pressure. When there is no demand for high pressure air, the booster stalls and consumes no energy. It restarts automatically when there is demand.
| Flowrate in SCFM | |||||||
| Supply Pressure psi |
Air Supply Pressure | ||||||
| 90 | 100 | 110 | 120 | 150 | 200 | 250 | |
| 70 | 4 | 3 | 3 | 2 | |||
| 80 | 5 | 5 | 5 | 3 | 1 | ||
| 90 | 6 | 6 | 5 | 3 | |||
| 100 | 7 | 6 | 5 | ||||
| 125 | 9 | 5 | |||||
| 150 | 9 | 7 | |||||
Model AL002 - $1010
280 psi Maximum Pressure
3.5 Gallon Receiver Tank
17"Lx11"Wx17"H • 31 pounds
» Brochure
» Instructions
Dump Valve Option
Model GA001 • $290
Automatically vents air from booster and tank when supply air pressure is removed.
Quiet Muffler Option
Model GB001 • $40
Reduces sound pressure level by about 5 decibels as compared with the standard muffler
Special Relief Valve Option
Model GC001 • $40
Replace standard 200 psi relief valve with a lower pressure valve.
